2021
Bizhani, H., Muyeen, S. M., Tatari, F. R., Techato, K., Ben-Brahim, L., & Blaabjerg, F. (2021). Current stress and switching loss evaluation of a unified expandable power converter used for grid‐integration of renewable energy sources. IET Renewable Power Generation.
Ali, L., Muyeen, S. M., Bizhani, H., & Ghosh, A. (2021). A multi‐objective optimization for planning of networked microgrid using a game theory for peer‐to‐peer energy trading scheme. IET Generation, Transmission & Distribution.
H. Bizhani, S. K. H. Sani, H. Rezazadeh and S. Muyeen, "A Comprehensive Comparison of a Lead-Acid Battery Electro-Thermal Performance Considering Different Charging Profiles," 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), 2021, pp. 1-6.
Mohtashami Borzadaran, H. A., Jabbari, H., Amini, M., & Dolati, A. (2021). Stress-Strength and Ageing Intensity Analysis via a New Bivariate Negative Gompertz-Makeham Model. Journal of The Iranian Statistical Society, 20(1), 219-246.
Mohammadi, M., & Maghrebi, M. J. (2021). Improvement of wind turbine aerodynamic performance by vanquishing stall with active multi air jet blowing. Energy, 224, 120176.
Toudarbari, S., Maghrebi, M. J., & Hashemzadeh, A. (2021). Evaluation of Darrieus wind turbine for different highway settings using CFD simulation. Sustainable Energy Technologies and Assessments, 45, 101077.
2020
Roshan, A., Sagharichi, A., & Maghrebi, M. J. (2020). Nondimensional parameters’ effects on hybrid Darrieus–Savonius wind turbine performance. Journal of Energy Resources Technology, 142(1), 011202.
Hosseini, S. F., Hashemian, A., & Reali, A. (2020). Studies on knot placement techniques for the geometry construction and the accurate simulation of isogeometric spatial curved beams. Computer Methods in Applied Mechanics and Engineering, 360, 112705.
Nosrati, N., Zabett, A., & Sahebian, S. (2020). Long-term creep behaviour of E-glass/epoxy composite: time-temperature superposition principle. Plastics, Rubber and Composites, 49(6), 254-262.
Taban, A., Jalali, A., & Zamani, M. (2020). Effect of Blade Angle of Attack on the Performance of the Darius J-Shaped Vertical Axial Wind Turbine. Modares Mechanical Engineering, 20(7), 1773-1788.
Akhlaghi, H., Soltani, M. R., & Maghrebi, M. J. (2020). Transitional boundary layer study over an airfoil in combined pitch-plunge motions. Aerospace Science and Technology, 98, 105694.
Shajiee, M., Sani, S. K. H., Shamaghdari, S., & Naghibi-Sistani, M. B. (2020). Design of a robust H∞ dynamic sliding mode torque observer for the 100 KW wind turbine. Sustainable Energy, Grids and Networks, 24, 100393.
2019
Hashemian, A., & Hosseini, S. F. (2019). Nonlinear bifurcation analysis of statically loaded free-form curved beams using isogeometric framework and pseudo-arclength continuation. International Journal of Non-Linear Mechanics, 113, 1-16.
2018
Hosseini, S. F., Moetakef-Imani, B., Hadidi-Moud, S., & Hassani, B. (2018). Pre-bent shape design of full free-form curved beams using isogeometric method and semi-analytical sensitivity analysis. Structural and Multidisciplinary Optimization, 58(6), 2621-2633.
Hosseini, S. F., Hashemian, A., & Reali, A. (2018). On the application of curve reparameterization in isogeometric vibration analysis of free-from curved beams. Computers & Structures, 209, 117-129.
Hosseini, S. F., Hashemian, A., Moetakef-Imani, B., & Hadidimoud, S. (2018). Isogeometric analysis of free-form Timoshenko curved beams including the nonlinear effects of large deformations. Acta Mechanica Sinica, 34(4), 728-743.
Nazari, S., Zamani, M., & Moshizi, S. A. (2018). Comparison between two-dimensional and three-dimensional computational fluid dynamics techniques for two straight-bladed vertical-axis wind turbines in inline arrangement. Wind Engineering, 42(6), 647-664.
Sagharichi, A., Zamani, M., & Ghasemi, A. (2018). Effect of solidity on the performance of variable-pitch vertical axis wind turbine. Energy, 161, 753-775.
Ekhteraei Toosi, H., & Hosseini Sani, S. K. (2018). Evaluation of Fixed and Single-Axis Tracking Photovoltaic Systems Using Modeling Tool and Field Testing. Journal of Solar Energy Research, 3(4), 261-266.
2017
Sobhani, E., Ghaffari, M., & Maghrebi, M. J. (2017). Numerical investigation of dimple effects on darrieus vertical axis wind turbine. Energy, 133, 231-241.
Hosseini-Sani, S. K., Vaezi, N., & Tavakkoli, P. (2017). DMC versus Gain Scheduled PI Controller for Pitch Regulation of 100 KW Wind Turbine. The Modares Journal of Electrical Engineering, 16(4), 1-9.
Maghrebi, M. J., Masoudi Nejad, R., & Masoudi, S. (2017). Performance analysis of sloped solar chimney power plants in the southwestern region of Iran. International Journal of Ambient Energy, 38(6), 542-549.
Movahhed, A. M., Toossian Shandiz, H., & Hosseini Sani, S. K. (2017). Fractional Modeling and Analysis of Buck Converter in CCM Mode P. Journal of Artificial Intelligence and Data Mining, 5.
2016
Karbasian, H. R., Moshizi, S. A., & Maghrebi, M. J. (2016). Dynamic stall analysis of S809 pitching airfoil in unsteady free stream velocity. Journal of Mechanics, 32(2), 227-235.
Zamani, M., & Maghrebi, M. J. (2016). Improvement of Vertical Axis Wind Turbine Performance Using Different J-shaped Profiles. Modares Mechanical Engineering, 15(11), 203-214.
Ghorashi, H., & Moetakef-Imani, B. (2016). Development of robust and adaptive controller for blade testing machine. Renewable Energy, 85, 234-247.
Hatami, A., & Moetakef-Imani, B. (2016). Innovative adaptive pitch control for small wind turbine fatigue load reduction. Mechatronics, 40, 137-145.
Zamani, M., Maghrebi, M. J., & Varedi, S. R. (2016). Starting torque improvement using J-shaped straight-bladed Darrieus vertical axis wind turbine by means of numerical simulation. Renewable Energy, 95, 109-126.
Zamani, M., Maghrebi, M. J., & Moshizi, S. A. (2016). Numerical study of airfoil thickness effects on the performance of J-shaped straight blade vertical axis wind turbine. Wind & structures, 22(5), 595-616.
Sagharichi, A., Maghrebi, M. J., & ArabGolarcheh, A. (2016). Variable pitch blades: An approach for improving performance of Darrieus wind turbine. Journal of renewable and sustainable energy, 8(5), 053305.
Zamani, M., Nazari, S., Moshizi, S. A., & Maghrebi, M. J. (2016). Three dimensional simulation of J-shaped Darrieus vertical axis wind turbine. Energy, 116, 1243-1255.
Movahed, A. M., Shandiz, H. T., & Hosseini Sani, S. K. (2016). Comparison of fractional order modelling and integer order modelling of fractional order buck converter in continuous condition mode operation. Advances in Electrical and Electronic Engineering, 14(5), 531-542.
2015
Rajabi, A., Kadkhodayan, M., Manoochehri, M., & Farjadfar, R. (2015). Deep-drawing of thermoplastic metal-composite structures: Experimental investigations, statistical analyses and finite element modeling. Journal of Materials Processing Technology, 215, 159-170.
2014
Djavareshkian, M. H., & Saber, M. R. (2014). Comparison of Performance Base and Optimized Blades of Horizontal Axis Wind Turbine. International Journal of Renewable Energy Research (IJRER), 4(1), 61-68.
Kouravand, S., & Imani, B. M. (2014). Developing a surface roughness model for end-milling of micro-channel. Machining Science and Technology, 18(2), 299-321.
Hashemian, S. A., & Moetakef Imani, B. (2014). Nonlinear variation analysis of compliant sheet metal assemblies including effect of surface continuity in components. In Applied Mechanics and Materials (Vol. 532, pp. 503-509). Trans Tech Publications Ltd.
Kouravand, S., Imani, B. M., & Ni, J. (2014). Topography and surface roughness of floor in groove micro milling. Journal of Mechanics, 30(6), 667-678.
Kadkhodayan, M., & Rajabi, A. (2014). An investigation into the deep drawing of fiber-metal laminates based on glass fiber reinforced polypropylene. International Journal of Engineering, 27(3), 349-358.
Hashemian, A., & Imani, B. M. (2014). An improved sensitivity-free probability analysis in variation assessment of sheet metal assemblies. Journal of Engineering Design, 25(10-12), 346-366.
2013
Bidarouni, A. L., & Djavareshkian, M. H. (2013). An optimization of wind turbine airfoil possessing good stall characteristics by genetic algorithm utilizing cfd and neural network. International Journal of Renewable Energy Research (IJRER), 3(4), 993-1003.
Pichan, M., Rastegar, H., & Monfared, M. (2013). Two fuzzy-based direct power control strategies for doubly-fed induction generators in wind energy conversion systems. Energy, 51, 154-162.
Sheibani, M., & Akbar Akbari, A. (2013). Investigation of damage detection in blade root joints of a 100 kW wind turbine using frequency tracking. Journal of Vibroengineering, 15(1), 364-373.
Djavareshkian, M. H., Bidarouni, A. L., & Saber, M. R. M. (2013). New Approach to High-Fidelity Aerodynamic Design Optimization of a Wind Turbine Blade. International Journal of Renewable Energy Research (IJRER), 3(3), 725-734.
2012
Monfared, M., & Golestan, S. (2012). Control strategies for single-phase grid integration of small-scale renewable energy sources: A review. Renewable and Sustainable Energy Reviews, 16(7), 4982-4993.